String & Hedge Trimmer Services Prices
| Install NEW Oil/Fuel Filler Cap | $5 | ||
| Install NEW Rewind Cover Assembly | $5 | ||
| Respool Trimmer Line | $10 | ||
| Replace Trimmer Head | $10 | ||
|
Install NEW Air Filter (includes removal of excess dust and dirt from air box) |
$10 |
||
| Replace Fuel Line, Filter, and Primer Bulb | $15 | ||
| Clean & Greese Gear Head | $15 | ||
| Install NEW Rewind Rope | $20 | ||
| Remove Clean & Repack Gear Box | $20 | ||
| Flush of Fuel or Oil Tank | $20 | ||
| Install NEW Rewind Spring | $30 | ||
| Clean & Sharpen Cutter Bar & Adjust Spacing | $50 | ||
| R&R Throttle / Trigger Assembly | $50 | ||
| Basic Compression Test | $50 | ||
|
Tune- Up (Includes: Install Spark Plug, Inspect Air Filter, Inspect Chain, Sharpen Chain & Recondition Bar, Inspect & Adjust Chain Tension, Check Compression, Inspect Safety System, Check Ignition, Test for Proper Operation, Adjust & Clean Carb, Inspect Exhasut Screen/ Spark Arrest Screen, Test Run, & Suggest Additional Parts) |
$75 Min |
||
| Engine Rebuild | $100 Min | ||
| **Pricing is labor only, Parts are an additional fee** | |||
| (Contact us for a more specific quote and to check availability of the needed parts) | |||
|
Additional Repairs at a reasonable hourly labor rate $100. the labor is based on reasonable amount of time for the specified job. Unusually dirty or difficult jobs may incur additional labor |
|||
| All prices are subject to change without notice | |||
Flat Rate PRICING
|
Labor rate per Hour $100.00 |
|
Price | ||||
| $25 surcharge for excessive condition degradation | |||||
|
1 |
|
|||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|||||
|
|
||||
|
|
||||
| $25 surcharge for excessive condition degradation | |||||
|
|
|
|||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
Blade Sharpening & Inspection Included See sheet for details of the inspection |
|||||
|
|
||||
|
|
||||
| $25 surcharge for excessive condition degradation | |||||
|
|
|
|||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|
||||
|
|||||
|
|
||||
| Pick Up and Delivery available upon request. Rate $4 per Loaded Mile | ||
| The Hunting Corner | ||
| 1110 HWY 24 & 36 Monroe City, MO 63456 | ||
| Thehuntingcornermo@gmail.com |
Chainsaw Service Prices
Chain Sharpening Bar Reconditioning Off the Saw On the Saw Off the Saw On the Saw $10.50 $14.00 $15.00 $20.00 Install NEW Oil/Fuel Filler Cap $5.00 Install NEW Bar Cover $5.00 Install NEW Rewind Cover Assembly $5.00 Install NEW Air Filter (includes removal of excess dust and dirt from air box)
$10.00
Install NEW Saw Bar (includes R&R of Chain and cleaning of bar mounting area)
$15.00
Replace Fuel Line, Filter, and Primer Bulb $15.00 Flush of Fuel or Oil Tank $20.00 Install NEW Rewind Rope $20.00 Install NEW Chain (includes R&R of Saw Bar and cleaning of bar mounting area)
$20.00
Install NEW Rewind Spring $30.00 Install NEW Sprocket system (includes R&R of Chain and saw bar and cleaning of bar mounting area)
$35.00
Install NEW Clutch (includes R&R of Chain and saw bar and cleaning of bar mounting area)
$35.00
Install Chain Oiler (includes R&R of Chain, Saw Bar and clutch/ sprocket system and cleaning of bar mounting area)
$45.00
R&R Throttle / Trigger Assembly $50.00 Basic Compression Test $50.00 Tune- Up (Includes: Install Spark Plug, Inspect Air Filter, Inspect Chain, Sharpen Chain & Recondition Bar, Inspect & Adjust Chain Tension, Check Compression, Inspect Safety System, Check Ignition, Test for Proper Operation, Adjust & Clean Carb, Inspect Exhasut Screen/ Spark Arrest Screen, Test Run, & Suggest Additional Parts)
$75 Min
Complete R & R of Fuel System (New Carb, Fuel Line, Filters, Flush Tank) $100.00 Engine Rebuild $100 Min **Pricing is labor only, Parts are an additional fee** (Contact us for a more specific quote and to check availability of the needed parts) Additional Repairs at a reasonable hourly labor rate $100. the labor is based on reasonable amount of time for the specified job. Unusually dirty or difficult jobs may incur additional labor
All prices are subject to change without notice LAWNMOWER INSPECTION
$100
Listed below are the services performed by our technicians to ensure that your equipment is ready to mow.
Inspect overall condition of engine Sharpen and balance blades
Test engine compression Air all tires to specifications
Tighten engine mounting bolts Inspect blade drive spindles Inspect all idler pulleys Test ignition voltage
Test charging output Inspect air filter Check hydro oil and filter Inspect spark plug Tighten and lubricate chassis Check engine oil Adjust steering Inspect blade belt Test safety switches Adjust brakes Inspect wiring Clean cooling fins Clean battery connections Treat fuel system Test solenoid Lubricate starter Inspect all engine governor linkages Inspect front axle assemblies Inspect drive belt Pressure wash Test run system to ensure equipment is functioning properly Test equipment a final time with customer to ensure satisfaction
All repairs will be billed at our standard shop rate.
PRICING DOES NOT INCLUDE ANY PARTS OR LABOR FOR INSTALATION!
